Skip to main content

Communication Center

I don't think I have told you all yet, I got promoted a few weeks ago.

My boss retired and I was selected to take over for her. The past few weeks have been busy with organization projects. I am pretty proud of the communication center I just made today.


To make this communication center, I started off by buying a piece of sheet metal. We priced several different ways but I ended up buying a 24 x 36 inch sheet from Home Depot. {The cost for the metal was $19.96.}

Next, I hit up the office supply store and found some acrylic file folders on clearance.I needed 4 folders so I had to buy two boxes. {The cost of the folders was $24.00.} The office supply store also had a peel and stick dry erase board on clearance. {$9.00} They also had random magnets, dry erase markers, and butterfly magnets all on clearance. {Total of the random items was $4.00.} Other random supplies I used: magnets {$5/for 52 magnets, chalkboard vinyl, super glue {both on-hand}.


I started off by adhering two magnets to each acrylic folder. I learned it was not enough so I added two more to each. I used my Cricut and the new Sophisticate cartridge to cut out the labels.  I cut 4 matching labels. I then adhered them to the front of the folder.


If I were making this project at home, I might have convinced The Husband to screw the sheet metal to the wall. But this is for work and we are not allowed to put holes in the wall. Instead, I purchased a jumbo pack of the 3M Command strips. The instructions on the box says that two strips will hold 12 pounds.

The sheet metal did not weigh close to 12 pounds but I did not want to take a chance that sheet metal would fall off the wall, so I used eight sets of 3M strips.


I ended up adding two more magnets to each folder, making a total of six magnets to each folder.  The rest was just easy. The peel and stick dry erase board took patience and time but was as easy as the name suggested. We added a bucket to put the dry erase markers in. The bucket is held up with a suction cup hook.   Decorative magnets were used to fill in space, but they are more than cute they are also functional.

For a total of less than $50.00 I created an attractive and fun communication center for the office.


I am looking forward to showing you all my office...but not today! It still needs a little bit of work!

Comments

  1. So cute!!! Love it!! Great Job...

    ReplyDelete
  2. You are so cute and crafty!

    ReplyDelete
  3. I love to bring cute and crafts to the workplace! I would love to have you link up to my Show Me Your Plaid Monday's! http://www.pandpkitchen.com/2012/12/30/show-me-your-plaid-mondays-4/

    ReplyDelete
  4. Have a Great New Year! Thanks for Linking up at Show Me Your Plaid Monday's! You have been Pinned! I hope you return each week!

    ReplyDelete

Post a Comment

Popular posts from this blog

My Weekend Project: A PVC Camping Lamp Post and Flag Holder

I have seen a few of these around campsites and I knew I would like to have one. The only problem that I had is The Husband. He already thinks we drag too much stuff with us when we go camping and if I had told him my desire to have a PVC Camping Light Pole he would have shut it down quickly! So, that leaves a girl with only one choice: Figure out how to do it by herself. I did some internet searching and found a few road maps on RV forums. They seemed easy enough! I visited the local hardware store for the supplies: An exterior post lantern light 2 inch PVC pipe (I used 5 feet but had to purchase a 10 foot piece) A 3 inch toilet flange A 3 inch to 2 inch Reducer PVC Glue A 12 foot electric cord kit 2 - 3/4 inch PVC Caps I also used a few supplies we already had on hand: White Spray Paint 3 1/2 foot - 3/4 inch PVC Pipe Drill Bits (1 inch and 1/2 inch) Tent Stakes The first step was preparing the lantern light. I could only find black i

Tonsillectomy (Warning Photos!)

The Short Chic came down with a pretty nasty case of strep throat back in April. So, when The Boy started complaining about his throat hurting about 12 days later, I was pretty confident that he had inherited his sister's strep. Instead, The Boy was diagnosed with a peritonsillar abscess growing on his right tonsil.  We had to immediately see an ENT  Physician who took a needle and drained the abscess. He removed about 5.5 cc of puss from The Boys throat.and then told us that once you have a peritonsillar abscess you were high risk to keep getting them. The Boy's tonsils were now compromised and needed to be removed.  We were told to plan for a two week recovery so we worked a surgery into our summer plans. Between family vacations, summer sports, and the beginning of school The Boy had his second surgery. A tonsillectomy.  Pre-surgery prepping went well. It must be nice to be young and have healthy veins for an IV! The Boy had lots of pre-surgery visitors. My

Liver Cheese: A Family Tradition

Today is an anniversary date. One of those dates you wish you did not have to remember but there is no way you can forget.  Fifteen years ago today,two days after his birthday, my father died of lung cancer. He was a lifelong smoker and his cancer was aggressive. His battle was short. He fought for six short months after his diagnosis. He knew the chemo was not working and that his time was limited. When he came to this realization he became the best dad in the world.                                                In the days before my father's passing, my family shared some memorable moments. One of those moments centers around the deli meat: Liver Cheese.I would not be surprised if you have never heard of it, or even never tasted it. But I was raised on it as it was one of my Dad's favorite things.  What is it? Well, it is a German food that is actually called Leberkase. It is bacon, corned beef, pork, and onion that is ground together and baked. It comes with a