I have seen a few of these around campsites and I knew I would like to have one. The only problem that I had is The Husband. He already thinks we drag too much stuff with us when we go camping and if I had told him my desire to have a PVC Camping Light Pole he would have shut it down quickly! So, that leaves a girl with only one choice: Figure out how to do it by herself. I did some internet searching and found a few road maps on RV forums. They seemed easy enough! I visited the local hardware store for the supplies: An exterior post lantern light 2 inch PVC pipe (I used 5 feet but had to purchase a 10 foot piece) A 3 inch toilet flange A 3 inch to 2 inch Reducer PVC Glue A 12 foot electric cord kit 2 - 3/4 inch PVC Caps I also used a few supplies we already had on hand: White Spray Paint 3 1/2 foot - 3/4 inch PVC Pipe Drill Bits (1 inch and 1/2 inch) Tent Stakes The first step was preparing the lantern light. I could only find black i...
That "2" is way too close to the light.
ReplyDeleteI agree, Anonymous. However, we did not want to add extra holes to the siding.
ReplyDeleteI think the light needs to be bigger...
ReplyDelete